Checkout Mattresses for slats There are two types of slatted bed frames: Sprung slats and solid slats which are just thin planks of wood extending across the bedframe. There is no justification to say whether one type of slatted base is better than the other but both come with their own set of benefits and problems.
The higher the fill power, the better the duvet is, both in terms of content and how long it is likely to last. If we look at the construction between these two ranges we see that the only difference is the inclusion of a wool spring protector Pad on the mattresses deemed fit for use on a bedstead. This should equate to a pad of three inches in depth which should be more acceptable.
This article explains what to look out for and tips when using a slatted base with a mattress. Firstly, nearly all mattresses are suitable for nearly all bed frames. Perhaps there may be a disclaimer with cheaper one sided mattresses where there is insufficient wadding on the non-use side but if the mattress is well made there should be a relatively firm pad or adequate wadding on the underside to keep the spring unit stable. There are of course associated reasons why this happens.
The mattress itself can be so unsubstantial and lightweight that the arches on the slats are pushing the internal spring unit out of shape. The underside wadding of the mattress one sided no turn has such an inadequate level of support upholstery that the springs are practically forming on to the slats. This does sound so much more dramatic in theory than actuality, but the principle is there.
More than sufficient fillings and wadding to add an extra element of cushioning between the springs and the slats to act as a dampener. Solid slats do have the advantage over sprung slats as a better surface for all pocket sprung mattresses.
The thing to remember is that a pocket sprung mattress requires a flat even surface in order for the mechanics of the individual springs to work with the sleeper. The suspension qualities of a sprung edged base are precisely what the sprung slats are trying to replicate but not too efficiently I might add.
There is a considerable difference in user comfort levels between a mattress on a sprung edged divan base, and a mattress on a sprung or solid slatted base. Pocket springs work best when there is a system of gradual suspension.
This means that as the weight applied to the mattress is under duress, the springs in the mattress takes the strain and the springs in the base cushions the blow if you will. As stupid as this statement sounds this is actually what you are being told! If we look at the construction between these two ranges we see that the only difference is the inclusion of a wool spring protector Pad on the mattresses deemed fit for use on a bedstead. This is the component directly on top and bottom of the actual spring unit and the following layers of upholstery can be deemed similar to the models within their Bed Collection.
The wool spring protector pad will be within a GSM tolerance and although compressed and slightly firmer than the usual GSM bonded wool and cotton as the insulator used for the bulk of their models, I cannot see any reason to differentiate between these two ranges.
If the returning argument is that there has to be a more substantial spring insulator for mattresses used on a bedstead, then surely this negates the benefit of having a completely pliable calico spring unit in the first place.
What else should I consider? I have to point out here that to fully understand this post you will have to read the posts on spring types , divan bases , mattress upholstery and wadding etc. You will soon come to realise everything to do with manufacture and usage will depend upon a number of variables.
Use these articles as an initial line of questioning, but bear in mind that they only just scratch the surface and a great number of other factors will have to be taken into account. A mattress placed directly onto a slatted base with no cushioning whatsoever will of course cause the mattress to gain unsightly and potentially damaging ridges into the underside of the mattress upholstery noticeable when you turn your mattress.
At the very least you should be placing some sort of cushioning foundation directly onto your slats to prevent this happening such as an old duvet etc. There are products sold as mattress pads for this very reason but these are very minimal in construction that the duvet thesis is a far better and more affordable solution. This is due to the vast amounts if fillings within them compared to shop bought mattresses. Visit our mattress range here We have also found that slats can nip and bite the mattress fabric over time causing tears and snags, by boarding over and using say a cheap duvet to cover the base you can avoid having your slats damage the mattress.
Boarding over a slatted bed base To address the issue of the desirable flat surface for your mattress when used on a sprung slatted base, you should really be taking measures to do all you can to achieve this.
At the very least you should be placing some sort of cushioning foundation directly onto your slats to prevent this happening such as an old duvet etc. This ensures a consistent surface and removes the issue of slats causing dipping or damage to your mattress.
The best method we have found is to place thin sheets about mm of MDF onto your slats, to create the flat even surface required. This image shows three lengths of MDF sheets bridging the arched slats and central bar to prevent the central dipping problems.
They are also not so big as to prevent any problems with aeration to the mattress. This has been topped off with a substantial feather topper to add an element of cushioning to the underside of the mattress.
The best answer is to go for a platform or sprung edge divan ideally. This ensures a consistent surface and removes the issue of slats causing dipping or damage to your mattress. Whilst a nice looking bed frame is a consideration when buying a new bed, you also have to weigh this up against the impact of certain slatted bed frames.
Particularly against your mattresses longevity, comfort and consistency.
As you will read in the comments below we have had prototypes of a sprung mattress pad made to address the issue of the lack of gradual support between the mattress and the base. We did trial these on a bedframe and the theory does work with a noticeable increase in overall comfort. However, these prototypes did come in at a depth of between four and five inches in height and coupled with the height of the mattress 10 inches completely dominated the bedframe.
The headboard was dwarfed and the tail board was completely swamped. The suspension pad will have to include some sort of spring system, and even mini springs at two inches in height will have to have some sort of wadding either side to cushion the unit.
This should equate to a pad of three inches in depth which should be more acceptable. We at present offer a range of divans which can be used with your existing mattress or one of our models.
If you need more help please call our friendly team on
В© 2016 - 2018 Business_Blog. All rights reserved | Template by W3layouts